Running Claw Control with the V5 Controller

Power on your V5 Controller

Press the square Power Button in the center of the controller to turn it on.

Set up Driver Control

Use the Arrow buttons to highlight the Driver Control program's icon (highlighted in the image).

Then press the A button to choose Drive.

Press the A button again to choose Run.

Press the B button to return to the previous menu, if needed.

Use the L1 and L2 Buttons on the Left Side of the Controller to close and open the claw

  • The rectangular L1 button on the front of the controller closes the claw.
  • The rectangular L2 button on the front of the controller opens the claw.